Title

The A/B, A/B/C, or A/B/C/D switch used for network switching in IP-based VTC systems implementing a single CODEC supporting conferences on multiple networks having different classification levels must be Common Criteria certified. (Cat II impact)

Discussion

Common Criteria provides assurance that the process of specification, implementation, and evaluation of a computer security product has been conducted in a rigorous, standard, and repeatable manner at a level that is commensurate with the target environment for use. The DSAWG mandated that the A/B, A/B/C, or A/B/C/D switches used in VTC systems implementing a single CODEC supporting conferences on multiple networks having different classification levels, where these networks are simultaneously and permanently connected to these networks, must receive NIAP approval in accordance with CNSSP #11. This was primarily due to the potential interconnection of separate networks designated as National Security Systems through the switch. This was a prerequisite to their approval of the multinetwork VTC system architecture. Therefore, the A/B, A/B/C, or A/B/C/D switch must be satisfactorily evaluated and validated in accordance with the provisions of the NIAP Common Criteria Evaluation and Validation Scheme.

Check Content

Review the NIAP Product Compliant List (PCL) at https://www.niap-ccevs.org to verify that a certification exists for the A/B, A/B/C, or A/B/C/D switch or review a vendor-provided letter from NIAP or the NIAP test report indicating satisfactory completion of testing and PCL listing. Validation of certification via the NIAP PCL can be more easily facilitated if the vendor has provided the certification number. If the product is not on the list or a NIAP letter or test report is not provided, this is a finding.

Fix Text

Obtain and install an A/B, A/B/C, or A/B/C/D switch that has obtained Common Criteria certification.

Additional Identifiers

Rule ID: SV-55751r1_rule

Vulnerability ID: V-43022

Group Title: RTS-VTC 7140 [IP]

Expert Comments

CCIs tied to check.

Controls tied to check. These are derived from the CCIs shown above.