Check: RTS-VTC 7180
Video Services Policy STIG:
RTS-VTC 7180
(in versions v1 r12 through v1 r8)
Title
An IP-based VTC system implementing a single set of input/output devices (cameras, microphones, speakers, control system), an A/V switcher, and multiple CODECs connected to multiple IP networks having different classification levels must provide automatic mutually exclusive power control for the CODECs or their network connections such that only one CODEC is powered on or one CODEC is connected to any network at any given time. (Cat II impact)
Discussion
If a VTC system is implemented using multiple CODECs, each connected to a network having a different classification level, along with an A/V switcher, a potential path exists through the CODECs and A/V switcher that could permit classified information to be exposed/released from one classified network to a network having a lower classification. Minimally powering off the CODEC will provide a level of isolation that will prevent active passage of data. The above solution could still provide an electrical leakage path between the networks whereby classified information could leak onto another network. To improve on the electrical isolation between networks and as an alternative to powering off the CODECs, an optical link using fiber optic to Ethernet media adaptors/converters/modems between the CODEC and each of the networks it serves could be implemented. In this case, the fiber optic media adaptors would be powered in a mutually exclusive manner. Mutually exclusive power means that only one CODEC or fiber optic adaptor can be powered at a time. Turning on one CODEC or fiber optic adaptor turns off power for all others.
Check Content
Review the VTC system architecture to determine the method of network isolation used. Verify that only one CODEC or fiber optic media adaptor can be turned on at a time by attempting to turn on more than one CODEC concurrently. If more than one CODEC operates, this is a finding.
Fix Text
Obtain and implement a power control system that can support automatic mutually exclusive power control.
Additional Identifiers
Rule ID: SV-55753r1_rule
Vulnerability ID: V-43024
Group Title: RTS-VTC 7180 [IP]
Expert Comments
CCIs
Number | Definition |
---|---|
No CCIs are assigned to this check |
Controls
Number | Title |
---|---|
No controls are assigned to this check |