Check: ESXI-67-000065
VMware vSphere 6.7 ESXi STIG:
ESXI-67-000065
(in versions v1 r3 through v1 r1)
Title
For the ESXi host, all port groups must not be configured to VLAN values reserved by upstream physical switches. (Cat II impact)
Discussion
Certain physical switches reserve certain VLAN IDs for internal purposes and often disallow traffic configured to these values. For example, Cisco Catalyst switches typically reserve VLANs 1001-1024 and 4094, while Nexus switches typically reserve 3968-4047 and 4094. Check the documentation for the specific switch. Using a reserved VLAN might result in a denial of service on the network.
Check Content
From the vSphere Client, select the ESXi host and go to Configure >> Networking >> Virtual switches. For each virtual switch, review the port group VLAN tags and verify they are not set to a reserved VLAN ID. or From a PowerCLI command prompt while connected to the ESXi host, run the following command: Get-VirtualPortGroup | Select Name, VLanId If any port group is configured with a reserved VLAN ID, this is a finding.
Fix Text
From the vSphere Client, select the ESXi host and go to Configure >> Networking >> Virtual switches. Highlight a port group where VLAN ID is set to a reserved value and click "Edit" settings (dots). Change the VLAN ID to an appropriate VLAN and click "OK". or From a PowerCLI command prompt while connected to the ESXi host, run the following command: Get-VirtualPortGroup -Name "portgroup name" | Set-VirtualPortGroup -VLanId "New VLAN#"
Additional Identifiers
Rule ID: SV-239319r674886_rule
Vulnerability ID: V-239319
Group Title: SRG-OS-000480-VMM-002000
Expert Comments
CCIs
Number | Definition |
---|---|
CCI-000366 |
The organization implements the security configuration settings. |
Controls
Number | Title |
---|---|
CM-6 |
Configuration Settings |