Title

The UEM server must authenticate endpoint devices (servers) before establishing a local, remote, and/or network connection using bidirectional authentication that is cryptographically based. (Cat II impact)

Discussion

Without authenticating devices, unidentified or unknown devices may be introduced, thereby facilitating malicious activity. Bidirectional authentication provides stronger safeguards to validate the identity of other devices for connections that are of greater risk, such as remote connections. This requires device-to-device authentication. Information systems must use IEEE 802.1x, Extensible Authentication Protocol [EAP], Radius server with EAP-Transport Layer Security [TLS] authentication, or Kerberos to identify/authenticate devices on local and/or wide area networks. Satisfies:FMT_SMF.1.1(2) b, FTP_ITC.1.1(1), FTP_ITC.1.2(1), FTP_ITC.1.3(1) Reference:PP-MDM-431009

Check Content

Verify the UEM server authenticates endpoint devices (servers) before establishing a local, remote, and/or network connection using bidirectional authentication that is cryptographically based. If the UEM server does not authenticate endpoint devices (servers) before establishing a local, remote, and/or network connection using bidirectional authentication that is cryptographically based, this is a finding.

Fix Text

Configure the UEM server to authenticate endpoint devices (servers) before establishing a local, remote, and/or network connection using bidirectional authentication that is cryptographically based.

Additional Identifiers

Rule ID: SV-234673r961881_rule

Vulnerability ID: V-234673

Group Title: SRG-APP-000580

Expert Comments

CCIs tied to check.

Controls tied to check. These are derived from the CCIs shown above.