Title

The system must not accept source-routed IPv4 packets. (Cat II impact)

Discussion

Source-routed packets allow the source of the packet to suggest routers forward the packet along a different path than configured on the router, which can be used to bypass network security measures. This requirement applies only to the handling of source-routed traffic destined to the system itself, not to traffic forwarded by the system to another system, such as when IPv4 forwarding is enabled and the system is functioning as a router.

Check Content

Verify the system does not accept source-routed IPv4 packets. Procedure: # grep [01] /proc/sys/net/ipv4/conf/*/accept_source_route|egrep "default|all" If all of the resulting lines do not end with "0", this is a finding.

Fix Text

Configure the system to not accept source-routed IPv4 packets. Edit /etc/sysctl.conf and add a setting for "net.ipv4.conf.all.accept_source_route=0" and "net.ipv4.conf.default.accept_source_route=0". Reload the sysctls. Procedure: # sysctl -p

Additional Identifiers

Rule ID: SV-45724r1_rule

Vulnerability ID: V-22414

Group Title: GEN003607

Expert Comments

CCIs tied to check.

Controls tied to check. These are derived from the CCIs shown above.