Check: RHEL-08-030742
RHEL 8 STIG:
RHEL-08-030742
(in versions v2 r1 through v1 r12)
Title
RHEL 8 must disable network management of the chrony daemon. (Cat III impact)
Discussion
Inaccurate time stamps make it more difficult to correlate events and can lead to an inaccurate analysis. Determining the correct time a particular event occurred on a system is critical when conducting forensic analysis and investigating system events. Sources outside the configured acceptable allowance (drift) may be inaccurate. Not exposing the management interface of the chrony daemon on the network diminishes the attack space. RHEL 8 utilizes the "timedatectl" command to view the status of the "systemd-timesyncd.service". The "timedatectl" status will display the local time, UTC, and the offset from UTC. Note that USNO offers authenticated NTP service to DOD and U.S. Government agencies operating on the NIPR and SIPR networks. Visit https://www.usno.navy.mil/USNO/time/ntp/DOD-customers for more information.
Check Content
Note: If the system is approved and documented by the information system security officer (ISSO) to function as an NTP time server, this requirement is Not Applicable. Verify RHEL 8 disables network management of the chrony daemon with the following command: $ sudo grep -w 'cmdport' /etc/chrony.conf cmdport 0 If the "cmdport" option is not set to "0", is commented out or missing, this is a finding.
Fix Text
Configure the operating system disable network management of the chrony daemon by adding or modifying the following line in the "/etc/chrony.conf" file. cmdport 0
Additional Identifiers
Rule ID: SV-230486r1017270_rule
Vulnerability ID: V-230486
Group Title: SRG-OS-000095-GPOS-00049
Expert Comments
CCIs
Number | Definition |
---|---|
CCI-000381 |
Configure the system to provide only organization-defined mission essential capabilities. |
Controls
Number | Title |
---|---|
CM-7 |
Least Functionality |