Title

RHEL 8 must disable the chrony daemon from acting as a server. (Cat III impact)

Discussion

Inaccurate time stamps make it more difficult to correlate events and can lead to an inaccurate analysis. Determining the correct time a particular event occurred on a system is critical when conducting forensic analysis and investigating system events. Sources outside the configured acceptable allowance (drift) may be inaccurate. Minimizing the exposure of the server functionality of the chrony daemon diminishes the attack surface. RHEL 8 utilizes the "timedatectl" command to view the status of the "systemd-timesyncd.service". The "timedatectl" status will display the local time, UTC, and the offset from UTC. Note that USNO offers authenticated NTP service to DOD and U.S. Government agencies operating on the NIPR and SIPR networks. Visit https://www.usno.navy.mil/USNO/time/ntp/DOD-customers for more information.

Check Content

Note: If the system is approved and documented by the information system security officer (ISSO) to function as an NTP time server, this requirement is Not Applicable. Verify RHEL 8 disables the chrony daemon from acting as a server with the following command: $ sudo grep -w 'port' /etc/chrony.conf port 0 If the "port" option is not set to "0", is commented out or missing, this is a finding.

Fix Text

Configure the operating system to disable the chrony daemon from acting as a server by adding or modifying the following line in the "/etc/chrony.conf" file: port 0

Additional Identifiers

Rule ID: SV-230485r1017269_rule

Vulnerability ID: V-230485

Group Title: SRG-OS-000095-GPOS-00049

Expert Comments

CCIs tied to check.

Controls tied to check. These are derived from the CCIs shown above.