Check: RHEL-06-000084
Red Hat Enterprise Linux 6 STIG:
RHEL-06-000084
(in versions v2 r2 through v1 r24)
Title
The system must not accept ICMPv4 redirect packets on any interface. (Cat II impact)
Discussion
Accepting ICMP redirects has few legitimate uses. It should be disabled unless it is absolutely required.
Check Content
The status of the "net.ipv4.conf.all.accept_redirects" kernel parameter can be queried by running the following command: $ sysctl net.ipv4.conf.all.accept_redirects net.ipv4.conf.all.accept_redirects = 0 $ grep net.ipv4.conf.all.accept_redirects /etc/sysctl.conf /etc/sysctl.d/* net.ipv4.conf.all.accept_redirects = 0 If "net.ipv4.conf.all.accept_redirects" is not configured in the /etc/sysctl.conf file or in the /etc/sysctl.d/ directory, is commented out or does not have a value of "0", this is a finding.
Fix Text
To set the runtime status of the "net.ipv4.conf.all.accept_redirects" kernel parameter, run the following command: # sysctl -w net.ipv4.conf.all.accept_redirects=0 Set the system to the required kernel parameter by adding the following line to "/etc/sysctl.conf" or a config file in the /etc/sysctl.d/ directory (or modify the line to have the required value): net.ipv4.conf.all.accept_redirects = 0 Issue the following command to make the changes take effect: # sysctl --system
Additional Identifiers
Rule ID: SV-217915r603264_rule
Vulnerability ID: V-217915
Group Title: SRG-OS-000480
Expert Comments
CCIs
Number | Definition |
---|---|
CCI-000366 |
Implement the security configuration settings. |
Controls
Number | Title |
---|---|
CM-6 |
Configuration Settings |