Check: RHEL-06-000089
Red Hat Enterprise Linux 6 STIG:
RHEL-06-000089
(in versions v2 r2 through v1 r24)
Title
The system must not accept IPv4 source-routed packets by default. (Cat II impact)
Discussion
Accepting source-routed packets in the IPv4 protocol has few legitimate uses. It should be disabled unless it is absolutely required.
Check Content
The status of the "net.ipv4.conf.default.accept_source_route" kernel parameter can be queried by running the following command: $ sysctl net.ipv4.conf.default.accept_source_route net.ipv4.conf.default.accept_source_route = 0 $ grep net.ipv4.conf.default.accept_source_route /etc/sysctl.conf /etc/sysctl.d/* net.ipv4.conf.default.accept_source_route = 0 If "net.ipv4.conf.default.accept_source_route" is not configured in the /etc/sysctl.conf file or in the /etc/sysctl.d/ directory, is commented out or does not have a value of "0", this is a finding.
Fix Text
To set the runtime status of the "net.ipv4.conf.default.accept_source_route" kernel parameter, run the following command: # sysctl -w net.ipv4.conf.default.accept_source_route=0 Set the system to the required kernel parameter by adding the following line to "/etc/sysctl.conf" or a config file in the /etc/sysctl.d/ directory (or modify the line to have the required value): net.ipv4.conf.default.accept_source_route = 0 Issue the following command to make the changes take effect: # sysctl --system
Additional Identifiers
Rule ID: SV-217918r603264_rule
Vulnerability ID: V-217918
Group Title: SRG-OS-000480
Expert Comments
CCIs
Number | Definition |
---|---|
CCI-000366 |
Implement the security configuration settings. |
Controls
Number | Title |
---|---|
CM-6 |
Configuration Settings |