Check: OL6-00-000096
Oracle Linux 6 STIG:
OL6-00-000096
(in versions v2 r7 through v1 r9)
Title
The system must use a reverse-path filter for IPv4 network traffic when possible on all interfaces. (Cat II impact)
Discussion
Enabling reverse path filtering drops packets with source addresses that should not have been able to be received on the interface they were received on. It should not be used on systems which are routers for complicated networks, but is helpful for end hosts and routers serving small networks.
Check Content
The status of the "net.ipv4.conf.all.rp_filter" kernel parameter can be queried by running the following command: $ sysctl net.ipv4.conf.all.rp_filter The output of the command should indicate a value of "1". If this value is not the default value, investigate how it could have been adjusted at runtime, and verify it is not set improperly in "/etc/sysctl.conf". $ grep net.ipv4.conf.all.rp_filter /etc/sysctl.conf If the correct value is not returned, this is a finding.
Fix Text
To set the runtime status of the "net.ipv4.conf.all.rp_filter" kernel parameter, run the following command: # sysctl -w net.ipv4.conf.all.rp_filter=1 If this is not the system's default value, add the following line to "/etc/sysctl.conf": net.ipv4.conf.all.rp_filter = 1
Additional Identifiers
Rule ID: SV-208863r793648_rule
Vulnerability ID: V-208863
Group Title: SRG-OS-000480
Expert Comments
CCIs
Number | Definition |
---|---|
CCI-000366 |
The organization implements the security configuration settings. |
Controls
Number | Title |
---|---|
CM-6 |
Configuration Settings |