Title

The layer 2 switch must be configured to disable non-essential capabilities. (Cat II impact)

Discussion

A compromised switch introduces risk to the entire network infrastructure as well as data resources that are accessible via the network. The perimeter defense has no oversight or control of attacks by malicious users within the network. Preventing network breaches from within is dependent on implementing a comprehensive defense-in-depth strategy, including securing each device connected to the network. This is accomplished by following and implementing all security guidance applicable for each node type. A fundamental step in securing each switch is to enable only the capabilities required for operation.

Check Content

Review the switch configuration to determine if services or functions not required for operation, or not related to switch functionality, are enabled. If unnecessary services and functions are enabled on the switch, this is a finding.

Fix Text

Remove unneeded services and functions from the switch. Removal is recommended since the service or function may be inadvertently enabled otherwise. However, if removal is not possible, disable the service or function.

Additional Identifiers

Rule ID: SV-206646r382903_rule

Vulnerability ID: V-206646

Group Title: SRG-NET-000131

Expert Comments

CCIs tied to check.

Controls tied to check. These are derived from the CCIs shown above.