Title

The Juniper router must be configured to generate log records for privileged activities. (Cat II impact)

Discussion

Without generating audit records that are specific to the security and mission needs of the organization, it would be difficult to establish, correlate, and investigate the events relating to an incident or identify those responsible for one. Audit records can be generated from various components within the network device (e.g., module or policy filter).

Check Content

Review the router configuration to verify that it is compliant with this requirement as shown in the example configurations below. syslog { file LOG_FILE { change-log info; interactive-commands info; } } Note: The parameter "any" can be in place of "change-log" and “interactive-commands” as this will log everything. Also, a syslog server can be configured in addition to or in lieu of logging to a file as shown in the example below. system { syslog { host x.x.x.x { any info; } } If the router is not configured to generate log records for privileged activities, this is a finding.

Fix Text

Configure the router to generate log records for privileged activities as shown in the example below. [edit system] set syslog file LOG_FILE change-log info set syslog file LOG_FILE interactive-commands info Note: The parameter "any" can be in place of "change-log" and “interactive-commands” as this will log everything. Also, a syslog server can be configured in addition to or in lieu of logging to a file as shown in the example below. set syslog host x.x.x.x any info

Additional Identifiers

Rule ID: SV-217346r961827_rule

Vulnerability ID: V-217346

Group Title: SRG-APP-000504-NDM-000321

Expert Comments

CCIs tied to check.

Controls tied to check. These are derived from the CCIs shown above.