Title

The Juniper EX switch must be configured to generate audit records containing the full-text recording of privileged commands. (Cat II impact)

Discussion

Reconstruction of harmful events or forensic analysis is not possible if audit records do not contain enough information. Organizations consider limiting the additional audit information to only that information explicitly needed for specific audit requirements. The additional information required is dependent on the type of information (i.e., sensitivity of the data and the environment within which it resides). At a minimum, the organization must audit full-text recording of privileged commands. The organization must maintain audit trails in sufficient detail to reconstruct events to determine the cause and impact of compromise.

Check Content

Determine if the network device generates audit records containing the full-text recording of privileged commands. Verify the system logs the facility "any", or minimally "change-log" and "interactive-commands", and the logging level is appropriate. Generally, the "all" (debug) logging level should be avoided because the number of logged messages is significant. [edit system syslog] host <IPv4 or IPv6 syslog address> { any info; } file <file name> { change-log info; interactive-commands info; } Note: If minimally logging only configuration changes, there will be other files receiving the events from the other logging facilities (for example "authorizations" or "firewall"). Syslog outputs in standard format unless the "structured-data" directive is configured. Verify the "structured-data" command for all files and external syslog servers requiring that format. For example: [edit system syslog] host <IPv4 or IPv6 syslog address> { change-log info; interactive-commands info; structured-data; } file <file name> { any info; structured-data; } If such audit records are not being generated, this is a finding.

Fix Text

Configure the network device to generate audit records containing the full-text recording of privileged commands. set system syslog host <IPv4 or IPv6 syslog address> change-log info set system syslog host <IPv4 or IPv6 syslog address> interactive-commands info -or- set system syslog host <IPv4 or IPv6 syslog address> any info set system syslog file <file name> change-log info set system syslog file <file name> interactive-commands info -or- set system syslog file <file name> any info

Additional Identifiers

Rule ID: SV-253895r879569_rule

Vulnerability ID: V-253895

Group Title: SRG-APP-000101-NDM-000231

Expert Comments

CCIs tied to check.

Controls tied to check. These are derived from the CCIs shown above.