Title

The SNMP service must use only SNMPv3 or its successors. (Cat II impact)

Discussion

SNMP Versions 1 and 2 are not considered secure. Without the strong authentication and privacy that is provided by the SNMP Version 3 User-based Security Model (USM), an attacker or other unauthorized users may gain access to detailed system management information and use that information to launch attacks against the system.

Check Content

Verify the SNMP daemon is not configured to use community strings. # cat /etc/SnmpAgent.d/snmpd.conf |egrep -i "get-community-name|set-community-name" If any configuration is found, this is a finding.

Fix Text

Edit /etc/SnmpAgent.d/snmpd.conf and remove references to get-community-name and set-community-name. Restart the SNMP service. # /sbin/init.d/SnmpMaster The snmpd script (/usr/sbin/snmpd) will take care of starting the subagents. It if does not, check the options in /etc/rc.config.d/SnmpMaster that influence the startup behavior.

Additional Identifiers

Rule ID: SV-26716r1_rule

Vulnerability ID: V-22447

Group Title: GEN005305

Expert Comments

CCIs tied to check.

Controls tied to check. These are derived from the CCIs shown above.