Check: CISC-RT-000070
Cisco NX OS Switch RTR STIG:
CISC-RT-000070
(in versions v2 r3 through v1 r0.1)
Title
The Cisco switch must be configured to have all non-essential capabilities disabled. (Cat III impact)
Discussion
A compromised switch introduces risk to the entire network infrastructure, as well as data resources that are accessible via the network. The perimeter defense has no oversight or control of attacks by malicious users within the network. Preventing network breaches from within is dependent on implementing a comprehensive defense-in-depth strategy, including securing each device connected to the network. This is accomplished by following and implementing all security guidance applicable for each node type. A fundamental step in securing each switch is to enable only the capabilities required for operation.
Check Content
Verify that the switch does not have any unnecessary or non-secure ports, protocols and services enabled. For example, the following features such as telnet should never be enabled, while other features should only be enabled if required for operations. feature telnet feature dhcp feature wccp feature nxapi feature imp If any unnecessary or non-secure ports, protocols, or services are enabled, this is a finding.
Fix Text
Disable features that should not be enabled unless required for operations. SW2(config)# no feature telnet SW2(config)# no feature dhcp SW2(config)# no feature wccp SW2(config)# no feature nxapi SW2(config)# no feature imp Note: Telnet must always be disabled.
Additional Identifiers
Rule ID: SV-221077r622190_rule
Vulnerability ID: V-221077
Group Title: SRG-NET-000131-RTR-000035
Expert Comments
CCIs
Number | Definition |
---|---|
CCI-000381 |
The organization configures the information system to provide only essential capabilities. |
Controls
Number | Title |
---|---|
CM-7 |
Least Functionality |