Check: CISC-ND-000470
Cisco NX OS Switch NDM STIG:
CISC-ND-000470
(in versions v2 r7 through v1 r0.1)
Title
The Cisco switch must be configured to prohibit the use of all unnecessary and nonsecure functions and services. (Cat I impact)
Discussion
Network devices are capable of providing a wide variety of functions and services. Some of the functions and services provided by default may not be necessary to support essential organizational operations. Additionally, it is sometimes convenient to provide multiple services from a single component (e.g., email and web services); however, doing so increases risk over limiting the services provided by any one component. To support the requirements and principles of least functionality, the network device must support the organizational requirements providing only essential capabilities and limiting the use of ports, protocols, and/or services to only those required, authorized, and approved. Some network devices have capabilities enabled by default; if these capabilities are not necessary, they must be disabled. If a particular capability is used, then it must be documented and approved.
Check Content
Verify that the switch does not have any unnecessary or non-secure ports, protocols and services enabled. For example, the following features such as telnet should never be enabled, while other features should only be enabled if required for operations. feature telnet feature dhcp feature wccp feature nxapi feature imp If any unnecessary or non-secure ports, protocols, or services are enabled, this is a finding.
Fix Text
Disable features that should not be enabled unless required for operations. SW2(config)# no feature telnet SW2(config)# no feature dhcp SW2(config)# no feature wccp SW2(config)# no feature nxapi SW2(config)# no feature imp Note: Telnet must always be disabled.
Additional Identifiers
Rule ID: SV-220486r879588_rule
Vulnerability ID: V-220486
Group Title: SRG-APP-000142-NDM-000245
Expert Comments
CCIs
Number | Definition |
---|---|
CCI-000382 |
The organization configures the information system to prohibit or restrict the use of organization-defined functions, ports, protocols, and/or services. |
Controls
Number | Title |
---|---|
CM-7 |
Least Functionality |