Check: CISC-ND-000160
Cisco IOS XE Switch NDM STIG:
CISC-ND-000160
(in versions v2 r8 through v1 r0.1)
Title
The Cisco switch must be configured to display the Standard Mandatory DoD Notice and Consent Banner before granting access to the device. (Cat II impact)
Discussion
Display of the DoD-approved use notification before granting access to the network device ensures privacy and security notification verbiage used is consistent with applicable federal laws, executive orders, directives, policies, regulations, standards, and guidance. System use notifications are required only for access via logon interfaces with human users.
Check Content
Review the Cisco switch configuration to verify that it is compliant with this requirement as shown in the example below: banner login ^C You are accessing a U.S. Government (USG) Information System (IS) that is provided for USG-authorized use only. By using this IS (which includes any device attached to this IS), you consent to the following conditions: -The USG routinely intercepts and monitors communications on this IS for purposes including, but not limited to, penetration testing, COMSEC monitoring, network operations and defense, personnel misconduct (PM), law enforcement (LE), and counterintelligence (CI) investigations. -At any time, the USG may inspect and seize data stored on this IS. -Communications using, or data stored on, this IS are not private, are subject to routine monitoring, interception, and search, and may be disclosed or used for any USG-authorized purpose. -This IS includes security measures (e.g., authentication and access controls) to protect USG interests--not for your personal benefit or privacy. -Notwithstanding the above, using this IS does not constitute consent to PM, LE or CI investigative searching or monitoring of the content of privileged communications, or work product, related to personal representation or services by attorneys, psychotherapists, or clergy, and their assistants. Such communications and work product are private and confidential. See User Agreement for details. ^C If the Cisco switch is not configured to display the Standard Mandatory DoD Notice and Consent Banner before granting access to the device, this is a finding.
Fix Text
Configure the Cisco switch to display the Standard Mandatory DoD Notice and Consent Banner before granting access as shown in the following example: SW1(config)#banner login # Enter TEXT message. End with the character '#'. You are accessing a U.S. Government (USG) Information System (IS) that is provided for USG-authorized use only. By using this IS (which includes any device attached to this IS), you consent to the following conditions: -The USG routinely intercepts and monitors communications on this IS for purposes including, but not limited to, penetration testing, COMSEC monitoring, network operations and defense, personnel misconduct (PM), law enforcement (LE), and counterintelligence (CI) investigations. -At any time, the USG may inspect and seize data stored on this IS. -Communications using, or data stored on, this IS are not private, are subject to routine monitoring, interception, and search, and may be disclosed or used for any USG-authorized purpose. -This IS includes security measures (e.g., authentication and access controls) to protect USG interests--not for your personal benefit or privacy. -Notwithstanding the above, using this IS does not constitute consent to PM, LE or CI investigative searching or monitoring of the content of privileged communications, or work product, related to personal representation or services by attorneys, psychotherapists, or clergy, and their assistants. Such communications and work product are private and confidential. See User Agreement for details. # SW1(config)#end
Additional Identifiers
Rule ID: SV-220525r879547_rule
Vulnerability ID: V-220525
Group Title: SRG-APP-000068-NDM-000215
Expert Comments
CCIs
Number | Definition |
---|---|
CCI-000048 |
The information system displays an organization-defined system use notification message or banner before granting access to the system that provides privacy and security notices consistent with applicable federal laws, Executive Orders, directives, policies, regulations, standards, and guidance. |
Controls
Number | Title |
---|---|
AC-8 |
System Use Notification |