Title

The BlackBerry UEM server or platform must be configured to initiate a session lock after a 15-minute period of inactivity. (Cat II impact)

Discussion

A session time-out lock is a temporary action taken when a user (MDM system administrator) stops work and moves away from the immediate physical vicinity of the information system but does not log out because of the temporary nature of the absence. Rather than relying on the user to manually lock their application session prior to leaving the vicinity, applications must be able to identify when a user's application session has idled and take action to initiate the session lock. The session lock is implemented at the point where session activity can be determined and/or controlled. This is typically at the operating system level and results in a system lock but may be at the application level where the application interface window is secured instead. SFR ID: FMT_SMF.1.1(2) c.8

Check Content

Review the BlackBerry UEM server configuration to determine whether the system is locked after 15 minutes. Have the system administrator log into the console. Verify the session locks after 15 minutes of inactivity. If the "Session timeout" is not set correctly, this is a finding.

Fix Text

On the BlackBerry UEM, do the following to set the session timeout: 1. Log in to the BlackBerry UEM console. 2. Go to the menu bar on the left. 3. Go to Settings >> General Settings >> Console. 4. Under "Session settings", enter "15". 5. Select "Save".

Additional Identifiers

Rule ID: SV-224374r604136_rule

Vulnerability ID: V-224374

Group Title: PP-MDM-411047

Expert Comments

CCIs tied to check.

Controls tied to check. These are derived from the CCIs shown above.