Check: AMLS-NM-000140
Arista MLS DCS-7000 Series NDM STIG:
AMLS-NM-000140
(in versions v1 r3 through v1 r2)
Title
The Arista Multilayer Switch must automatically audit account disabling actions. (Cat II impact)
Discussion
Account management, as a whole, ensures access to the network device is being controlled in a secure manner by granting access to only authorized personnel. Auditing account disabling actions will support account management procedures. When device management accounts are disabled, user or service accessibility may be affected. Auditing also ensures authorized active accounts remain enabled and available for use when required.
Check Content
Review the switch configuration and verify that logging is enabled. If logging is not enabled or is not enabled with sufficient detail to fulfill the specifications set forth in the VulDiscussion, this is a finding. To determine if logging is enabled, enter: switch#show logging The output must show logging as enabled, with a logging level of informational or debugging. In order to ensure all user commands are captured, the following statement must be in the running config. aaa accounting commands all default start-stop logging [group radius]
Fix Text
Enable logging on the switch with sufficient detail to fulfill the specifications set forth in the VulDiscussion. To configure logging to a remote syslog server at the informational level, enter: switch#config switch(config)#logging host [ip address] switch(config)#logging trap informational Then configure the following AAA aaa accounting commands all default start-stop logging [group radius]
Additional Identifiers
Rule ID: SV-75295r1_rule
Vulnerability ID: V-60839
Group Title: SRG-APP-000028-NDM-000210
Expert Comments
CCIs
Number | Definition |
---|---|
CCI-001404 |
The information system automatically audits account disabling actions. |
Controls
Number | Title |
---|---|
AC-2 (4) |
Automated Audit Actions |