Title

TOSS must use reverse path filtering on all IPv4 interfaces. (Cat II impact)

Discussion

It is detrimental for operating systems to provide, or install by default, functionality exceeding requirements or mission objectives. These unnecessary capabilities or services are often overlooked and therefore may remain unsecured. They increase the risk to the platform by providing additional attack vectors. Enabling reverse path filtering drops packets with source addresses that are not routable. There is not an equivalent filter for IPv6 traffic.

Check Content

Verify TOSS uses reverse path filtering on all IPv4 interfaces with the following commands: $ sudo sysctl net.ipv4.conf.all.rp_filter net.ipv4.conf.all.rp_filter = 1 If the returned line does not have a value of "1", or a line is not returned, this is a finding.

Fix Text

Configure TOSS to use reverse path filtering on all IPv4 interfaces by adding the following line to a file in the "/etc/sysctl.d" directory: net.ipv4.conf.all.rp_filter = 1 The system configuration files need to be reloaded for the changes to take effect. To reload the contents of the files, run the following command: $ sudo sysctl --system

Additional Identifiers

Rule ID: SV-253134r991589_rule

Vulnerability ID: V-253134

Group Title: SRG-OS-000480-GPOS-00227

Expert Comments

CCIs tied to check.

Controls tied to check. These are derived from the CCIs shown above.