Title

The system must disable network routing unless required. (Cat II impact)

Discussion

The network routing daemon, in.routed, manages network routing tables. If enabled, it periodically supplies copies of the system's routing tables to any directly connected hosts and networks and picks up routes supplied to it from other networks and hosts. Routing Internet Protocol (RIP) is a legacy protocol with a number of security weaknesses, including a lack of authentication, zoning, pruning, etc.

Check Content

Determine if routing is disabled. # routeadm -p | egrep "routing |forwarding" | grep enabled If the command output includes "persistent=enabled" or "current=enabled", this is a finding.

Fix Text

The Network Management profile is required. Disable routing for IPv4 and IPv6. # pfexec routeadm -d ipv4-forwarding -d ipv4-routing # pfexec routeadm -d ipv6-forwarding -d ipv6-routing To apply these changes to the running system, use the command: # pfexec routeadm -u

Additional Identifiers

Rule ID: SV-216380r603267_rule

Vulnerability ID: V-216380

Group Title: SRG-OS-000480

Expert Comments

CCIs tied to check.

Controls tied to check. These are derived from the CCIs shown above.