Title

The SDN controller must be configured in accordance with the security configuration settings based on DoD security configuration or implementation guidance, including STIGs, NSA configuration guides, CTOs, and DTMs. (Cat II impact)

Discussion

Configuring the network device to implement organization-wide security implementation guides and security checklists ensures compliance with federal standards and establishes a common security baseline across DoD that reflects the most restrictive security posture consistent with operational requirements. Configuration settings are the set of parameters that can be changed that affect the security posture and/or functionality of the network device. Security-related parameters are those parameters impacting the security state of the network device, including the parameters required to satisfy other security control requirements.

Check Content

Determine if the SDN controller is configured in accordance with the security configuration settings based on DoD security configuration or implementation guidance, including STIGs, NSA configuration guides, CTOs, and DTMs. If it is not configured in accordance with the designated security configuration settings, this is a finding.

Fix Text

Configure the SDN controller to be configured in accordance with the security configuration settings based on DoD security configuration or implementation guidance, including STIGs, NSA configuration guides, CTOs, and DTMs.

Additional Identifiers

Rule ID: SV-109205r1_rule

Vulnerability ID: V-100101

Group Title: SRG-NET-000512-SDN-002000

Expert Comments

CCIs tied to check.

Controls tied to check. These are derived from the CCIs shown above.