Check: SRG-NET-000230-RTR-000001
Router SRG:
SRG-NET-000230-RTR-000001
(in versions v4 r3 through v4 r1)
Title
The router must be configured to implement message authentication for all control plane protocols. (Cat II impact)
Discussion
A rogue router could send a fictitious routing update to convince a site's perimeter router to send traffic to an incorrect or even a rogue destination. This diverted traffic could be analyzed to learn confidential information about the site's network or used to disrupt the network's ability to communicate with other networks. This is known as a "traffic attraction attack" and is prevented by configuring neighbor router authentication for routing updates. This requirement applies to all IPv4 and IPv6 protocols that are used to exchange routing or packet forwarding information. This includes BGP, RIP, OSPF, EIGRP, IS-IS and LDP.
Check Content
Review the router configuration. For every protocol that affects the routing or forwarding tables (where information is exchanged between neighbors), verify that neighbor router authentication is enabled. If authentication is not enabled, this is a finding.
Fix Text
Configure authentication to be enabled for every protocol that affects the routing or forwarding tables.
Additional Identifiers
Rule ID: SV-216982r945861_rule
Vulnerability ID: V-216982
Group Title: SRG-NET-000230
Expert Comments
CCIs
| Number | Definition |
|---|---|
| CCI-000366 |
The organization implements the security configuration settings. |
| CCI-001184 |
The information system protects the authenticity of communications sessions. |
| CCI-002205 |
The information system uniquely identifies and authenticates source by organization, system, application, and/or individual for information transfer. |