Title

RHEL 9 System Administrator (SA) and/or information system security officer (ISSO) (at a minimum) must be alerted of an audit processing failure event. (Cat II impact)

Discussion

It is critical for the appropriate personnel to be aware if a system is at risk of failing to process audit logs as required. Without this notification, the security personnel may be unaware of an impending failure of the audit capability, and system operation may be adversely affected. Audit processing failures include software/hardware errors, failures in the audit capturing mechanisms, and audit storage capacity being reached or exceeded. This requirement applies to each audit data storage repository (i.e., distinct information system component where audit records are stored), the centralized audit storage capacity of organizations (i.e., all audit data storage repositories combined), or both. Satisfies: SRG-OS-000046-GPOS-00022, SRG-OS-000343-GPOS-00134

Check Content

Verify that RHEL 9 is configured to notify the SA and/or ISSO (at a minimum) in the event of an audit processing failure with the following command: $ sudo grep action_mail_acct /etc/audit/auditd.conf action_mail_acct = root If the value of the "action_mail_acct" keyword is not set to "root" and/or other accounts for security personnel, the "action_mail_acct" keyword is missing, or the retuned line is commented out, ask the SA to indicate how they and the ISSO are notified of an audit process failure. If there is no evidence of the proper personnel being notified of an audit processing failure, this is a finding.

Fix Text

Configure "auditd" service to notify the SA and ISSO in the event of an audit processing failure. Edit the following line in "/etc/audit/auditd.conf" to ensure that administrators are notified via email for those situations: action_mail_acct = root The audit daemon must be restarted for changes to take effect.

Additional Identifiers

Rule ID: SV-258163r926476_rule

Vulnerability ID: V-258163

Group Title: SRG-OS-000046-GPOS-00022

Expert Comments

CCIs tied to check.

Controls tied to check. These are derived from the CCIs shown above.