Title

RHEL 9 must define default permissions for the system default profile. (Cat II impact)

Discussion

The umask controls the default access mode assigned to newly created files. A umask of 077 limits new files to mode 600 or less permissive. Although umask can be represented as a four-digit number, the first digit representing special access modes is typically ignored or required to be "0". This requirement applies to the globally configured system defaults and the local interactive user defaults for each account on the system. Satisfies: SRG-OS-000480-GPOS-00228, SRG-OS-000480-GPOS-00227

Check Content

Verify the "umask" setting is configured correctly in the "/etc/profile" file with the following command: Note: If the value of the "umask" parameter is set to "000" "/etc/profile" file, the Severity is raised to a CAT I. $ grep umask /etc/profile umask 077 If the value for the "umask" parameter is not "077", or the "umask" parameter is missing or is commented out, this is a finding.

Fix Text

Configure RHEL 9 to define default permissions for all authenticated users in such a way that the user can only read and modify their own files. Add or edit the lines for the "umask" parameter in the "/etc/profile" file to "077": umask 077

Additional Identifiers

Rule ID: SV-258075r926212_rule

Vulnerability ID: V-258075

Group Title: SRG-OS-000480-GPOS-00228

Expert Comments

CCIs tied to check.

Controls tied to check. These are derived from the CCIs shown above.