Title

RHEL 9 must disable the Stream Control Transmission Protocol (SCTP) kernel module. (Cat II impact)

Discussion

It is detrimental for operating systems to provide, or install by default, functionality exceeding requirements or mission objectives. These unnecessary capabilities or services are often overlooked and therefore may remain unsecured. They increase the risk to the platform by providing additional attack vectors. Failing to disconnect unused protocols can result in a system compromise. The Stream Control Transmission Protocol (SCTP) is a transport layer protocol, designed to support the idea of message-oriented communication, with several streams of messages within one connection. Disabling SCTP protects the system against exploitation of any flaws in its implementation.

Check Content

Verify that RHEL 9 disables the ability to load the sctp kernel module with the following command: $ sudo grep -r sctp /etc/modprobe.conf /etc/modprobe.d/* blacklist sctp If the command does not return any output, or the line is commented out, and use of sctp is not documented with the information system security officer (ISSO) as an operational requirement, this is a finding.

Fix Text

To configure the system to prevent the sctp kernel module from being loaded, add the following line to the file /etc/modprobe.d/sctp.conf (or create sctp.conf if it does not exist): install sctp /bin/false blacklist sctp

Additional Identifiers

Rule ID: SV-257807r952166_rule

Vulnerability ID: V-257807

Group Title: SRG-OS-000095-GPOS-00049

Expert Comments

CCIs tied to check.

Controls tied to check. These are derived from the CCIs shown above.