Title

RHEL 8 must disable IEEE 1394 (FireWire) Support. (Cat III impact)

Discussion

It is detrimental for operating systems to provide, or install by default, functionality exceeding requirements or mission objectives. These unnecessary capabilities or services are often overlooked and therefore may remain unsecured. They increase the risk to the platform by providing additional attack vectors. The IEEE 1394 (FireWire) is a serial bus standard for high-speed real-time communication. Disabling FireWire protects the system against exploitation of any flaws in its implementation.

Check Content

Verify the operating system disables the ability to load the firewire-core kernel module. $ sudo grep -r firewire-core /etc/modprobe.d/* | grep "/bin/false" install firewire-core /bin/false If the command does not return any output, or the line is commented out, and use of the firewire-core protocol is not documented with the Information System Security Officer (ISSO) as an operational requirement, this is a finding. Verify the operating system disables the ability to use the firewire-core kernel module. Check to see if the firewire-core kernel module is disabled with the following command: $ sudo grep -r firewire-core /etc/modprobe.d/* | grep "blacklist" blacklist firewire-core If the command does not return any output or the output is not "blacklist firewire-core", and use of the firewire-core kernel module is not documented with the ISSO as an operational requirement, this is a finding.

Fix Text

Configure the operating system to disable the ability to use the firewire-core kernel module. Add or update the following lines in the file "/etc/modprobe.d/blacklist.conf": install firewire-core /bin/false blacklist firewire-core Reboot the system for the settings to take effect.

Additional Identifiers

Rule ID: SV-230499r1017282_rule

Vulnerability ID: V-230499

Group Title: SRG-OS-000095-GPOS-00049

Expert Comments

CCIs tied to check.

Controls tied to check. These are derived from the CCIs shown above.