Title

RHEL 8 must enable the USBGuard. (Cat II impact)

Discussion

Without authenticating devices, unidentified or unknown devices may be introduced, thereby facilitating malicious activity. Peripherals include, but are not limited to, such devices as flash drives, external storage, and printers. A new feature that RHEL 8 provides is the USBGuard software framework. The USBguard-daemon is the main component of the USBGuard software framework. It runs as a service in the background and enforces the USB device authorization policy for all USB devices. The policy is defined by a set of rules using a rule language described in the usbguard-rules.conf file. The policy and the authorization state of USB devices can be modified during runtime using the usbguard tool. The System Administrator (SA) must work with the site Information System Security Officer (ISSO) to determine a list of authorized peripherals and establish rules within the USBGuard software framework to allow only authorized devices.

Check Content

Verify the operating system has enabled the use of the USBGuard with the following command: $ sudo systemctl status usbguard.service usbguard.service - USBGuard daemon Loaded: loaded (/usr/lib/systemd/system/usbguard.service; enabled; vendor preset: disabled) Active: active (running) If the usbguard.service is not enabled and active, ask the SA to indicate how unauthorized peripherals are being blocked. If there is no evidence that unauthorized peripherals are being blocked before establishing a connection, this is a finding.

Fix Text

Configure the operating system to enable the blocking of unauthorized peripherals with the following commands: $ sudo systemctl enable usbguard.service $ sudo systemctl start usbguard.service Note: Enabling and starting usbguard without properly configuring it for an individual system will immediately prevent any access over a usb device such as a keyboard or mouse

Additional Identifiers

Rule ID: SV-244548r854077_rule

Vulnerability ID: V-244548

Group Title: SRG-OS-000378-GPOS-00163

Expert Comments

CCIs tied to check.

Controls tied to check. These are derived from the CCIs shown above.