Check: RHEL-07-040620
Red Hat Enterprise Linux 7 STIG:
RHEL-07-040620
(in versions v3 r14 through v3 r10)
Title
The Red Hat Enterprise Linux operating system must not forward Internet Protocol version 4 (IPv4) source-routed packets by default. (Cat II impact)
Discussion
Source-routed packets allow the source of the packet to suggest that routers forward the packet along a different path than configured on the router, which can be used to bypass network security measures. This requirement applies only to the forwarding of source-routed traffic, such as when IPv4 forwarding is enabled and the system is functioning as a router.
Check Content
Verify the system does not accept IPv4 source-routed packets by default. # grep -r net.ipv4.conf.default.accept_source_route /run/sysctl.d/* /etc/sysctl.d/* /usr/local/lib/sysctl.d/* /usr/lib/sysctl.d/* /lib/sysctl.d/* /etc/sysctl.conf 2> /dev/null net.ipv4.conf.default.accept_source_route = 0 If "net.ipv4.conf.default.accept_source_route" is not configured in the /etc/sysctl.conf file or in any of the other sysctl.d directories, is commented out, or does not have a value of "0", this is a finding. Check that the operating system implements the accept source route variable with the following command: # /sbin/sysctl -a | grep net.ipv4.conf.default.accept_source_route net.ipv4.conf.default.accept_source_route = 0 If the returned line does not have a value of "0", this is a finding. If conflicting results are returned, this is a finding.
Fix Text
Set the system to the required kernel parameter by adding the following line to "/etc/sysctl.conf" or a configuration file in the /etc/sysctl.d/ directory (or modify the line to have the required value): net.ipv4.conf.default.accept_source_route = 0 Issue the following command to make the changes take effect: # sysctl --system
Additional Identifiers
Rule ID: SV-204612r880806_rule
Vulnerability ID: V-204612
Group Title: SRG-OS-000480-GPOS-00227
Expert Comments
CCIs
Number | Definition |
---|---|
CCI-000366 |
The organization implements the security configuration settings. |
Controls
Number | Title |
---|---|
CM-6 |
Configuration Settings |