Title

Windows 10 must employ automated mechanisms to determine the state of system components with regard to flaw remediation using the following frequency: continuously, where ESS is used; 30 days, for any additional internal network scans not covered by ESS; and annually, for external scans by Computer Network Defense Service Provider (CNDSP). (Cat II impact)

Discussion

An approved tool for continuous network scanning must be installed and configured to run. Without the use of automated mechanisms to scan for security flaws on a continuous and/or periodic basis, the operating system or other system components may remain vulnerable to the exploits presented by undetected software flaws. To support this requirement, the operating system may have an integrated solution incorporating continuous scanning using ESS and periodic scanning using other tools, as specified in the requirement.

Check Content

Verify DoD-approved ESS software is installed and properly operating. Ask the site ISSM for documentation of the ESS software installation and configuration. If the ISSM is not able to provide a documented configuration for an installed ESS or if the ESS software is not properly maintained or used, this is a finding. Note: Example of documentation can be a copy of the site's CCB approved Software Baseline with version of software noted or a memo from the ISSM stating current ESS software and version.

Fix Text

Install DoD-approved ESS software and ensure it is operating continuously.

Additional Identifiers

Rule ID: SV-220701r939261_rule

Vulnerability ID: V-220701

Group Title: SRG-OS-000191-GPOS-00080

Expert Comments

CCIs tied to check.

Controls tied to check. These are derived from the CCIs shown above.