Check: JUEX-RT-000880
Juniper EX Series Switches Router STIG:
JUEX-RT-000880
(in versions v1 r3 through v1 r1)
Title
The Juniper BGP router must be configured to use its loopback address as the source address for iBGP peering sessions. (Cat III impact)
Discussion
Using a loopback address as the source address offers a multitude of uses for security, access, management, and scalability of the BGP routers. It is easier to construct appropriate ingress filters for router management plane traffic destined to the network management subnet since the source addresses will be from the range used for loopback interfaces instead of a larger range of addresses used for physical interfaces. Log information recorded by authentication and syslog servers will record the router’s loopback address instead of the numerous physical interface addresses. When the loopback address is used as the source for eBGP peering, the BGP session will be harder to hijack since the source address to be used is not known globally—making it more difficult for a hacker to spoof an eBGP neighbor. By using traceroute, a hacker can easily determine the addresses for an eBGP speaker when the IP address of an external interface is used as the source address. The routers within the iBGP domain should also use loopback addresses as the source address when establishing BGP sessions.
Check Content
Review the router configuration to verify that a loopback address has been configured. Verify that a loopback interface is used as the source address for all iBGP sessions. bgp { group iBGP { type internal; local-interface lo0.0; : } } If the router does not use its loopback address as the source address for all iBGP sessions, this is a finding.
Fix Text
Ensure that the router’s loopback address is used as the source address when originating traffic. set protocols bgp group <group name> type internal set protocols bgp group <group name> local-interface lo0.0
Additional Identifiers
Rule ID: SV-254060r844213_rule
Vulnerability ID: V-254060
Group Title: SRG-NET-000512-RTR-000001
Expert Comments
CCIs
Number | Definition |
---|---|
CCI-000366 |
The organization implements the security configuration settings. |
Controls
Number | Title |
---|---|
CM-6 |
Configuration Settings |