Title

The Juniper EX switch must be configured to automatically audit account removal actions. (Cat II impact)

Discussion

Account management, as a whole, ensures access to the network device is being controlled in a secure manner by granting access to only authorized personnel. Auditing account removal actions will support account management procedures. When device management accounts are terminated, user or service accessibility may be affected. Auditing also ensures authorized active accounts remain enabled and available for use when required.

Check Content

Check the network device to determine if account removal actions are automatically audited. This requirement may be verified by demonstration, configuration review, or validated test results. This requirement may be met through use of a properly configured authentication server if the device is configured to use the authentication server. Verify the system logs the facility "any", or minimally "change-log" and "interactive-commands", and the logging level is appropriate. Generally, the "all" (debug) logging level should be avoided because the number of logged messages is significant. [edit system syslog] host <IPv4 or IPv6 syslog address> { any info; } file <file name> { change-log info; interactive-commands info; } Note: If minimally logging only configuration changes, there will be other files receiving the events from the other logging facilities (for example 'authorizations' or 'firewall'). Syslog outputs in standard format unless the 'structured-data' directive is configured. Verify the 'structured-data' command for all files and external syslog servers requiring that format. For example: [edit system syslog] host <IPv4 or IPv6 syslog address> { change-log info; interactive-commands info; structured-data; } file <file name> { any info; structured-data; } If account removal actions are not automatically audited, this is a finding.

Fix Text

Configure the network device or its associated authentication server to automatically audit the removal of accounts. set system syslog host <IPv4 or IPv6 syslog address> change-log info set system syslog host <IPv4 or IPv6 syslog address> interactive-commands info -or- set system syslog host <IPv4 or IPv6 syslog address> any info set system syslog file <file name> change-log info set system syslog file <file name> interactive-commands info -or- set system syslog file <file name> any info

Additional Identifiers

Rule ID: SV-253882r879528_rule

Vulnerability ID: V-253882

Group Title: SRG-APP-000029-NDM-000211

Expert Comments

CCIs tied to check.

Controls tied to check. These are derived from the CCIs shown above.