An error occurred:

Juniper EX Series Switches Layer 2 Switch STIG

Juniper EX Series Switches Layer 2 Switch Security Technical Implementation Guide

ID Vuln ID Title Cat Status
JUEX-L2-000010 V-253948 The Juniper EX switch must be configured to disable non-essential capabilities. Cat I
JUEX-L2-000020 V-253949 The Juniper EX switch must be configured to uniquely identify all network-connected endpoint devices before establishing any connection. Cat I
JUEX-L2-000030 V-253950 The Juniper layer 2 switch must be configured to disable all dynamic VLAN registration protocols. Cat II
JUEX-L2-000040 V-253951 The Juniper EX switch must be configured to manage excess bandwidth to limit the effects of packet flooding types of denial of service (DoS) attacks. Cat II
JUEX-L2-000050 V-253952 The Juniper EX switch must be configured to permit authorized users to select a user session to capture. Cat II
JUEX-L2-000060 V-253953 The Juniper EX switch must be configured to permit authorized users to remotely view, in real time, all content related to an established user session from a component separate from the layer 2 switch. Cat II
JUEX-L2-000070 V-253954 The Juniper EX switch must be configured to authenticate all network-connected endpoint devices before establishing any connection. Cat II
JUEX-L2-000080 V-253955 The Juniper EX switch must be configured to enable Root Protection on all interfaces connecting to access layer switches and hosts. Cat III
JUEX-L2-000090 V-253956 The Juniper EX switch must be configured to enable BPDU Protection on all user-facing or untrusted access switch ports. Cat II
JUEX-L2-000100 V-253957 The Juniper EX switch must be configured to enable STP Loop Protection on all non-designated STP switch ports. Cat II
JUEX-L2-000110 V-253958 The Juniper EX switch must be configured not to forward unknown unicast traffic to access interfaces. Cat II
JUEX-L2-000120 V-253959 The Juniper EX switch must be configured to enable DHCP snooping for all user VLANs to validate DHCP messages from untrusted sources. Cat II
JUEX-L2-000130 V-253960 The Juniper EX switch must be configured to enable IP Source Guard on all user-facing or untrusted access VLANs. Cat II
JUEX-L2-000140 V-253961 The Juniper EX switch must be configured to enable Dynamic Address Resolution Protocol (ARP) Inspection (DAI) on all user VLANs. Cat II
JUEX-L2-000150 V-253962 The Juniper EX switch must be configured to enable Storm Control on all host-facing access interfaces. Cat III

Print

Display this benchmark in a printer-friendly format for off-line reference. This display does not include any commands.

Version Changes

If there are multiple versions of this benchmark, Xylok can display the differences between any changes in the checks.