Title

Forescout must deny network connection for endpoints that cannot be authenticated using an approved method. (Cat II impact)

Discussion

Without identifying devices, unidentified or unknown devices may be introduced, thereby facilitating malicious activity. Identification failure does not need to result in connection termination or preclude compliance assessment. This is particularly true for unmanaged systems or when the NAC is performing network discovery.

Check Content

Verify the NAC denies network connection for endpoints that cannot be authenticated using an approved method and log authentication failures. 1. Log on to Forescout UI. 2. From the Policy tab, select the Authentication and Authorization policy. 3. Find the 802.1x Authorization policy. If NAC does not have an authorization policy that denies network connection for endpoints that cannot be authenticated using an approved method and log authentication failures, this is a finding.

Fix Text

Log on to Forescout UI. 1. From the Policy tab, select the Authentication and Authorization policy. 2. Find the 802.1x Authorization policy and click Edit. From the Sub-Rules section, check that all of the options for authentication are selected including the following: -Machine Authenticated -User+Machine Authenticated -User+Managed Machine -User+NotMachine Authenticated If these are all configured, check that the final step is not authorized by one of the previous steps, and block traffic in accordance with the SSP by selecting "Add>". 1. Give the policy a name like "Deny Access". 2. In the Condition box, click "Add" and select "802.1x RADIUS Authentication State". 3. Check the box labeled "RADIUS-Rejected", and then click "OK". 4. In the Actions box, click "Add" and select a block action in accordance with the SSP.

Additional Identifiers

Rule ID: SV-233338r611394_rule

Vulnerability ID: V-233338

Group Title: SRG-NET-000148-NAC-000620

Expert Comments

CCIs tied to check.

Controls tied to check. These are derived from the CCIs shown above.