Check: F5BI-LT-000007
F5 BIG-IP Local Traffic Manager STIG:
F5BI-LT-000007
(in versions v2 r3 through v1 r2)
Title
The BIG-IP Core implementation must be configured to restrict or block harmful or suspicious communications traffic by controlling the flow of information between interconnected networks based on attribute- and content-based inspection of the source, destination, headers, and/or content of the communications traffic. (Cat I impact)
Discussion
Information flow control regulates where information is allowed to travel within a network and between interconnected networks. Blocking or restricting detected harmful or suspicious communications between interconnected networks enforces approved authorizations for controlling the flow of traffic. This requirement applies the Application Layer Gateway (ALG) when used as a gateway or boundary device that allows traffic flow between interconnected networks of differing security policies. The ALG is installed and configured in such a way that it restricts or blocks information flows based on guidance in the Ports, Protocols, and Services Management (PPSM) regarding restrictions for boundary crossing for ports, protocols and services. Information flow restrictions may be implemented based on attribute- and content-based inspection of the source, destination, headers, and/or content of the communications traffic. The ALG must be configured with policy filters (e.g., security policy, rules, and/or signatures) that restrict or block information system services; provide a packet-filtering capability based on header information; and/or perform message filtering based on message content. The policy filters used depend upon the type of application gateway (e.g., web, email, or TLS).
Check Content
If the BIG-IP Core does not perform packet-filtering intermediary services for virtual servers, this is not applicable. When packet-filtering intermediary services are performed, verify the BIG-IP Core is configured as follows: Verify Virtual Server(s) in the BIG-IP LTM module is configured with an AFM policy to restrict or block harmful or suspicious communications traffic by controlling the flow of information between interconnected networks based on attribute- and content-based inspection of the source, destination, headers, and/or content of the communications traffic. Navigate to the BIG-IP System manager >> Local Traffic >> Virtual Servers >> Virtual Servers List tab. Select Virtual Servers(s) from the list to verify. Navigate to the Security >> Policies tab. Verify that "Network Firewall" Enforcement is set to "Policy Rules..." and "Policy" is set to use an AFM policy to restrict or block harmful or suspicious communications traffic by controlling the flow of information between interconnected networks based on attribute- and content-based inspection of the source, destination, headers, and/or content of the communications traffic. If the BIG-IP Core is not configured to restrict or block harmful or suspicious communications traffic by controlling the flow of information between interconnected networks based on attribute- and content-based inspection of the source, destination, headers, and/or content of the communications traffic, this is a finding.
Fix Text
If user packet-filtering intermediary services are provided, configure the BIG-IP Core as follows: Configure a policy in the BIG-IP AFM module to restrict or block harmful or suspicious communications traffic by controlling the flow of information between interconnected networks based on attribute- and content-based inspection of the source, destination, headers, and/or content of the communications traffic. Apply the AFM policy to the applicable Virtual Server(s) in the BIG-IP LTM module to restrict or block harmful or suspicious communications traffic by controlling the flow of information between interconnected networks.
Additional Identifiers
Rule ID: SV-215740r557356_rule
Vulnerability ID: V-215740
Group Title: SRG-NET-000019-ALG-000018
Expert Comments
CCIs
Number | Definition |
---|---|
CCI-001414 |
The information system enforces approved authorizations for controlling the flow of information between interconnected systems based on organization-defined information flow control policies. |
Controls
Number | Title |
---|---|
AC-4 |
Information Flow Enforcement |