Title

For accounts using password authentication, the Cisco ISE must implement replay-resistant authentication mechanisms for network access to privileged accounts. (Cat II impact)

Discussion

A replay attack may enable an unauthorized user to gain access to the application. Authentication sessions between the authenticator and the application validating the user credentials must not be vulnerable to a replay attack. An authentication process resists replay attacks if it is impractical to achieve a successful authentication by recording and replaying a previous authentication message. Techniques used to address this include protocols using nonces (e.g., numbers generated for a specific one-time use) or challenges (e.g., TLS, WS_Security). Additional techniques include time-synchronous or challenge-response one-time authenticators.

Check Content

Navigate to Administration >> System >> Settings >> FIPS Mode. Verify FIPS Mode is enabled. If FIPS Mode is enabled, this is not a finding. If FIPS mode is not configured, but password authentication is configured to use FIPS 140-2/3 validated replay-resistant authentication mechanism for network access to privileged accounts , this can be lowered to a CAT 3 finding.

Fix Text

Enable FIPS Mode in Cisco ISE to ensure FIPS 140-2/3 algorithms are used in all security functions requiring cryptographic functions. 1. Choose Administration >> System >> Settings >> FIPS Mode. 2. Choose the "Enabled" option from the FIPS Mode drop-down list. 3. Click "Save" and restart the node. NOTE: Configuring FIPS mode is the required DoD configuration. However, this requirement can be lowered to a CAT 3 if the alternative manual configuration is used to configure individual protocols.

Additional Identifiers

Rule ID: SV-242642r879597_rule

Vulnerability ID: V-242642

Group Title: SRG-APP-000156-NDM-000250

Expert Comments

CCIs tied to check.

Controls tied to check. These are derived from the CCIs shown above.