Title

The Cisco router must be configured to generate an alert for all audit failure events. (Cat II impact)

Discussion

It is critical for the appropriate personnel to be aware if a system is at risk of failing to process audit logs as required. Without a real-time alert, security personnel may be unaware of an impending failure of the audit capability and system operation may be adversely affected. Alerts provide organizations with urgent messages. Real-time alerts provide these messages immediately (i.e., the time from event detection to alert occurs in seconds or less).

Check Content

Review the Cisco router configuration to verify that it is compliant with this requirement as shown in the example below. logging 10.1.12.7 vrf default severity critical Note: The parameter "critical" can be replaced with a lesser severity level (i.e., error, warning, notice, informational). If the Cisco router is not configured to generate an alert for all audit failure events, this is a finding.

Fix Text

Configure the Cisco router to send critical to emergency log messages to the syslog server as shown in the example below. RP/0/0/CPU0:R3(config)#logging 10.1.12.7 severity critical Note: The parameter "critical" can replaced with a lesser severity level (i.e., error, warning, notice, informational).

Additional Identifiers

Rule ID: SV-216534r991930_rule

Vulnerability ID: V-216534

Group Title: SRG-APP-000360-NDM-000295

Expert Comments

CCIs tied to check.

Controls tied to check. These are derived from the CCIs shown above.