Title

The Cisco ASA remote access VPN server must be configured to enforce certificate-based authentication before granting access to the network. (Cat I impact)

Discussion

To assure accountability and prevent unauthenticated access, non-privileged users must utilize multifactor authentication to prevent potential misuse and compromise of the system. Multifactor authentication uses two or more factors to achieve authentication. Use of password for user remote access for non-privileged account is not authorized. Factors include: (i) Something you know (e.g., password/PIN); (ii) Something you have (e.g., cryptographic identification device, token); or (iii) Something you are (e.g., biometric). A non-privileged account is any information system account with authorizations of a non-privileged user. Network access is any access to a network element by a user (or a process acting on behalf of a user) communicating through a network. The DoD CAC with DoD-approved PKI is an example of multifactor authentication.

Check Content

Review the ASA configuration to verify that it enforces certificate-based authentication before granting access to the network as shown in the example below. tunnel-group ANY_CONNECT type remote-access tunnel-group ANY_CONNECT webvpn-attributes authentication certificate If the ASA configuration does not enforce certificate-based authentication before granting access to the network, this is a finding.

Fix Text

Configure the ASA to enforce certificate-based authentication before granting access to the network as shown in the example below. ASA1(config)# tunnel-group ANY_CONNECT webvpn-attributes ASA1(config-tunnel-webvpn)# authentication certificate ASA1(config-tunnel-webvpn)# end

Additional Identifiers

Rule ID: SV-239968r666310_rule

Vulnerability ID: V-239968

Group Title: SRG-NET-000140-VPN-000500

Expert Comments

CCIs tied to check.

Controls tied to check. These are derived from the CCIs shown above.