Title

The Cisco ASA must be configured to protect against an individual (or process acting on behalf of an individual) falsely denying having performed organization-defined actions to be covered by non-repudiation. (Cat II impact)

Discussion

This requirement supports non-repudiation of actions taken by an administrator and is required in order to maintain the integrity of the configuration management process. All configuration changes to the network device are logged. To meet this requirement, the network device must log administrator access and activity.

Check Content

Review the Cisco ASA configuration to verify that it is compliant with this requirement. The configuration should look similar to the example below: logging enable logging buffered informational Note: The ASA will log all EXEC-mode commands that include the name of the user. The ASA also logs the name of the user entering the enable command. If logging of administrator activity is not configured, this is a finding.

Fix Text

Configure the ASA to log administrator activity as shown below. ASA(config)# logging enable ASA(config)# logging buffered informational ASA(config)# end

Additional Identifiers

Rule ID: SV-239903r879554_rule

Vulnerability ID: V-239903

Group Title: SRG-APP-000080-NDM-000220

Expert Comments

CCIs tied to check.

Controls tied to check. These are derived from the CCIs shown above.