Title

The BlackBerry Enterprise Mobility Server (BEMS) must be configured with an inactivity timeout of 15 minutes or less. (Cat II impact)

Discussion

A session time-out lock is a temporary action taken when a user stops work and moves away from the immediate physical vicinity of the information system but does not log out because of the temporary nature of the absence. Rather than relying on the user to manually lock their application session prior to vacating the vicinity, applications need to be able to identify when a user's application session has idled and take action to initiate the session lock.

Check Content

Verify the BEMS inactivity timeout is set to 15 minutes or less as follows: 1. Find the xml file "jetty.xml" located in the BEMS install directory on the BEMS host Windows server. 2. Find the "maxIdleTime" field. 3. Verify it is set to 900 or less (seconds). If the BEMS inactivity timeout is not set to 15 minutes (900 seconds) or less, this is a finding.

Fix Text

Configure BEMS with an inactivity timeout of 15 minutes or less. 1. Find the xml file "jetty.xml" located in the BEMS install directory on the BEMS host Windows server. 2. Find the "maxIdleTime" field and set it to 900 or less (seconds). 3. Save the file. 4. Restart the BEMS server.

Additional Identifiers

Rule ID: SV-93733r1_rule

Vulnerability ID: V-79027

Group Title: SRG-APP-000516-AS-000237

Expert Comments

CCIs tied to check.

Controls tied to check. These are derived from the CCIs shown above.